Vitrek V4 - Page 40

Vitrek V4 – Electrical Safety Tester USER MANUAL
39
*WAI (no query form)
Function:
WAI prevents the programming instrument from executing further commands or queries until all pending
operations are finished.
Syntax:
*WAI
:GROup
Function:
Set or query the value of group.
Syntax:
:GROup <NR1>
:GROup?
<NR1>is in the range from 0 through 9.
Return:
<NR1>
Examples:
:GROup 3 - sets the group to 3.
:GROup? - returns “ 3 if the group setting is 3.
:STEP
Function:
Set or query the value of step
Syntax:
: STEP <NR1>
:STEP?
<NR1> is in the range from 0 through 16.
Return:
<NR1>
Examples:
:STEP 3 - sets the step to 3
:STEP? - returns “3” if the STEP setting is 3.
:FUNCtion:TEST:MODe
Function:
Set or query the test function ( 0:EMPTY 1: ACW 2: DCW 3: IR 4: GB 5: CAC 6: CDC 7: HOLD )
Syntax:
:FUNCtion:TEST:MODe <NR1>
:FUNCtion:TEST:MODe?
<NR1> is in the range from 0 through 7.
Return:
<NR1>
Examples:
:FUNCtion:TEST:MODe 3 - sets the test function to IR.
:FUNCtion:TEST:MODe? - returns “3” if the test function setting is IR.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com