Vivint SmartHome ELEMENT - Attaching the Mounting Plate to the Wall

11
Vivint Element Installation Guide
Wiring
Attaching the Mounting Plate to the Wall
1.Carefullypullthelabeledwiresthroughthecenterholeinthemountingplate.
2.Positionthermostatforbestappearancetocovertheholeinthewall.
3.Markrstanddrilla¼in.(6mm)holeateachscrewlocation.
4.IfyouaremountingtheThermostattosheetrockorifyouareusingtheoldmountingholes,
usetheplasticanchorsprovided.
5.AttachtheThermostattothewallwiththescrewsprovided.