EasyManua.ls Logo

Vivint SmartHome ELEMENT - Installation Location

Vivint SmartHome ELEMENT
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Vivint Element Installation Guide
Getting Started
Installation Location
To avoid having to move your wiring to a new location, mount the
thermostat in place of the old thermostat.
Install the thermostat on an inside wall of an often-used room, about 5 ft. (1.5m) above
the oor.
• Do not install where there are unusual heating conditions, such as: in direct sunlight;near
a lamp, radio, television, radiator register, replace; near hot water pipes in the wall; or
near a stove on the other side of a wall.
Do not locate in unusual cooling conditions, such as: on a wall separating an unheated
room; or in a draft from a stairwell, door, or window .
• Do not locate in a damp area. This can lead to corrosion that will shorten the
thermo- stat’s life .
Do not locate where air circulation is poor, such as: a corner, an alcove, or behind an
open door.
• Ensure that the thermostat is level on the wall.

Related product manuals