DLP Projector—User’s Manual
– 28 –
Image Menu
Press the
MENU
button to open the
OSD
menu. Press the cursor ◄► button to move to the
Image
Menu
. Press the cursor ▲▼ button to move up and down in the
Image
menu. Press ◄► to change
values for settings.
I
TEM
D
ESCRIPTION
Display Mode Press the cursor ◄► button to set the Display Mode.
Brilliant Color Press the cursor ◄► button to adjust the Brilliant Color value.
Brightness Press the cursor ◄► button to adjust the display brightness.
Contrast Press the cursor ◄► button to adjust the display contrast.
Sharpness Press the cursor ◄► button to adjust the display sharpness level.
Gamma Press the cursor ◄► button to adjust the gamma correction of the display.
Advanced Press (Enter) / ► to enter the Advanced menu. See Advanced Feature on page 29.
Reset Press (Enter) / ► to reset all settings to default values.