Vivitek D5000 User Manual

DLP Projector—User’s Manual
– 38 –
Advanced Feature
Press the
Menu
button to open the
OSD
menu. Press ◄► to move to the
Installation II
menu.
Press ▲▼ to move to the
Advanced
menu and then press
Enter
or ►. Press ▲▼ to move up and
down in the
Advanced
menu. Press ◄► to change values for setting.
ITEM DESCRIPTION
OSD Menu Setting
Press Enter / ► to enter the OSD setting menu. See page 39 for more information on OSD
Menu Setting.
Peripheral Test
Press Enter/ ► to enter the Peripheral Test menu. See page 39 for more information on
Peripheral Test.
Lamp Hour Reset
After replacing the lamp, this item should be reset. See page 40 for more information on Lamp
Hour Reset.
Low Power Mode Press ◄► to turn Low Power Mode on or off.
3D Press ◄► to disable or enable different 3D modes.
RS232
Press ◄► to select RS232 (remote) or Network (LAN) mode depending on projector connec-
tion method.
Network
Press
(Enter) / ► to enter the Network menu. See page 41 for more information on
Network.
Note:
To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD
device under the 3D Disc Menu.

Vivitek D5000 Specifications

General

Brand	Vivitek
Model	D5000
Category	Projector
Language	English