Vivotek FD8151V - Page 131

VIVOTEK
User's Manual - 131
380,400,480
updateinterval 0,
3600,
86400,
604800,
2592000
0 6/6 0 to Disable automatic time
adjustment, otherwise, it indicates
the seconds between NTP
automatic update intervals.
restore 0,
<positive integer>
N/A 7/6 Restore the system parameters to
default values after <value>
seconds.
reset 0,
<positive integer>
N/A 7/6 Restart the server after <value>
seconds if <value> is
non-negative.
restoreexceptnet <Any value> N/A 7/6 Restore the system parameters to
default values except (ipaddress,
subnet, router, dns1, dns2,
pppoe).
This command can cooperate
with other “restoreexceptXYZ”
commands. When cooperating
with others, the system
parameters will be restored to the
default value except for a union
of the combined results.
restoreexceptdst <Any value> N/A 7/6 Restore the system parameters to
default values except all daylight
saving time settings.
This command can cooperate
with other “restoreexceptXYZ”
commands. When cooperating
with others, the system
parameters will be restored to
default values except for a union
of combined results.