Vivotek FD8151V User Manual

VIVOTEK
78 - User's Manual
Security > HTTPS
(Hypertext Transfer Protocol over SSL)

This section explains how to enable authentication and encrypted communication over
SSL (Secure Socket Layer)� It helps protect streaming data transmission over the Internet
on higher security level�
Create and Install Certicate Method
Before using HTTPS for communication with the Network Camera, a Certicate must be created
rst. There are three ways to create and install a certicate:
Create self-signed certificate
1� Select this option from a pull-down menu�
2. In the rst column, select Enable HTTPS secure connection, then select a connection option:
“HTTP & HTTPS” or “HTTPS only”.
3� Click Create certicate to generate a certicate.
4. The Certicate Information will automatically be displayed as shown below. You can click Certi-
cate properties to view detailed information about the certicate.
Advanced Mode

Vivotek FD8151V Specifications

General

Brand	Vivotek
Model	FD8151V
Category	Security Camera
Language	English