Vivotek FD8151V - Page 144

VIVOTEK
144 - User's Manual
s<0~(m-1)>_h
264_prioritypo
licy
framerate,
imagequal
ity
framerate 4/4 The policy to apply when the target bit
rate is not sufficient to satisfy current
encoded conditions.
“framerate” indicates frame rate first.
“imagequality” indicates image quality
first.
s<0~(m-1)>_h2
64_ratecontrolm
ode
cbr, vbr cbr 4/4 cbr, constant bitrate
vbr, fix quality
s<0~(m-1)>_h2
64_quant
1~5,99,100 3 4/4 Quality of video when choosing vbr in
“ratecontrolmode”.
99,100 is the customized manual input
setting.
1 = worst quality, 5 = best quality.
s<0~(m-1)>_h2
64_qpercent
1~100 45 4/4 Set quality by percentage.
1: Worst quality
100: Best quality
(s<0~(m-1)>_h264_quant = 100)
s<0~(m-1)>_h2
64_qvalue
0~51 26 4/4 Manual video quality level input.
(s<0~(m-1)>_h264_quant = 99)
s<0~(m-1)>_h2
64_bitrate
1000~8000
000
4000000 4/4 Set bit rate in bps when choosing cbr in
“ratecontrolmode”.
s<0~(m-1)>_
h264_
maxvbrbitrate
1000~4000
0000
40000000 4/4 Maximum vbr bitrate
s<0~(m-1)>_h2
64_maxframe
1~25,
26~30
(only for
60Hz
CMOS)
30 1/4 Set maximum frame rate in fps (for h264).
s<0~(m-1)>_h2
64_profile
0~2 1 1/4 Indicate H264 profiles
0: baseline
1: main profile
2: high profile