VIVOTEK
52 - User's Manual
Privacy mask
Advanced Mode
Click Privacy Mask to open the settings page. On this page, you can block out sensitive zones to
address privacy concerns�
■ To set the privacy mask windows, follow the steps below:
1� Click New to add a new window�
2. You can use the mouse cursor to re-size and to drag and drop the window, which is
recommended to be at least twice the size of the object (height and width) you want to cover.
3� Enter a Window Name and click Save to enable the setting�
4� Click on the Enable privacy mask checkbox to enable this function�
►
Up to 5 privacy mask windows can be set up on the same screen�
► If you want to delete the
privacy mask
window, please click the ‘x’ mark on the upper right corner
of the window�
2010/12/09 17:08:562010/12/09 17:08:56
NOTE:
To Next Page
Loading...
