VIVOTEK
68 - User's Manual
URL command -- http://<ip address>:<http port>/<access name for stream 1 or 2>
For example, when the Access name for stream 2 is set to
video2�mjpg:
1. Launch Mozilla Firefox.
2� Enter the above URL command in the address bar� Press Enter�
3. The JPEG images will be displayed in your web browser.
NOTE
► Microsoft
®
Internet Explorer does not support server push technology; therefore, You will not be able
to use the server push method to access an MJPEG stream as described above.
► Users can only request the stream 3 using URL commands
� For more information about URL
commands, please refer to page 120�
RTSP Streaming
To utilize RTSP streaming authentication, make sure that you have set a password for the Network
Camera rst; please refer to Security > User account on page 77 for details
�
http://192.168.5.151/video2.mjpg
NOTE:
To Next Page
Loading...
Need help?
General
