26 | EN EN | 27
Check the ll level of the CO
2
bottle
If the pressure display on the gauge for the bottle pressure A is indicating the
red zone, change the bottle (see “Replacing the CO
2
gas bottle” on page 28).
Maintenance
Check the CO
2
bottle
For the optimum and trouble-free operation of the water dispenser, please
make sure to carry out the tasks described in the next section according to the
schedule illustrated below.
If increased wear is identied during routine checks, the required intervals
should be shortened in accordance with the actual signs of wear.
Contact customer service with any questions regarding maintenance work and
intervals (see back page).
Maintenance works to be carried out by the operator
Interval Component Task
Daily Drip tray/
Wastewater container
Empty
Clean
Housing and display Clean
Tap outlet Clean
Twice a year Ventilation grilles Clean
Whenever necessary CO
2
bottle Check ll level
Replace
Maintenance works to be carried out by the manufacturer or a qualied
person
Task Interval
Water lter replacement Twice a year
Shut-off and angle valve check
Sanitizing and internal cleaning Twice a year or after a period of
inactivity of longer than 4 weeks
Safety check Every 2 years
Backow preventer check Every 5 years
Check / descale boiler Twice a year
Schedule
A
To Next Page
Loading...