Vogels Autogas Systems VGI Hardware Manual System Description and Installation
VGI Technical Manual 2014-01-14.pdf Pagina 34 van 44
1.13
GAS ECU Installation Instructions
• Install the gas system ECU in the engine bay or in the passenger compartment in accordance with the
regulations specified in the specific vehicle installation instructions. It can be mounted directly on the body or
by means of a support.
• Keep the gas system ECU as far away as possible from heat sources such as the exhaust, radiator etc., and
protect it from splashes.
• Bear in mind that the connector must be attachable and detachable.
• Attach the connector by pressing it on with pushed out lock tab.
• Then push in the connector lock and the connector will be pulled tightly against the gas system ECU and
locked.
To Next Page
Loading...