Need help?Do you have a question about the Vogt P18FXT and is the answer not in the manual?
Crucial safety information for qualified personnel handling equipment.
Guidelines for technically qualified persons handling refrigerants and systems.
Explains danger, warning, and caution symbols to alert users to hazards.
Details water supply and drain connection sizes and requirements for installation.
Guides on connecting the machine's electrical power supply and components.
Lists electrical requirements including voltage, FLA, and fuse sizes.
Instructions for checking phase sequence and voltage/current unbalance for proper operation.
Procedure for verifying correct motor rotation direction for pump and cutter.
Specific instructions for installing air-cooled condensers, including piping and line sizing.
Table to determine additional refrigerant needed based on liquid line length.
A final checklist to ensure all installation steps are completed before operation.
Information on the required refrigerant charge and initial system setup.
A step-by-step checklist to ensure proper preparation before machine start-up.
Detailed steps for the initial start-up process of the ice machine.
Procedure and precautions for adding refrigerant to the system.
Electrical schematic detailing the control circuit wiring for all voltages.
A comprehensive schedule for regular inspections and upkeep to ensure reliability.
A guide to common machine problems and their corresponding solutions.
Troubleshooting steps for when the ice machine fails to start or operate.
Diagnosing and resolving issues related to the machine freezing up unexpectedly.
Troubleshooting steps for when ice does not discharge properly from the freezer.
Identifying causes and solutions for ice that is not clear or uniform.
Diagnosing and resolving issues leading to reduced ice production.
Steps to identify and correct low oil levels in the compressor.
Troubleshooting steps for high head pressure issues in water-cooled units.
Troubleshooting steps for high head pressure issues in air-cooled units.
Explanation of the high-low pressure switch function and its settings.
Description of electronic motor protectors and solid-state protection systems.
Troubleshooting steps for electronic motor protectors and their components.
Explanation of the Sentronic oil pressure safety control and its operation.
Details on the CoreSense protection system and its fault indication.
Guidance on detecting refrigerant leaks and managing non-condensable gases.
To Next Page
General