Model DMTC22KW
Domestic Charger AC 22kW
2.5.3. Safety rules
Volt-E Charging solutions meet the following safety standards:
IEC 60950-1: security of technological information equipment.
IEC 61851-1: conductive charging system for electric vehicles.
IEC 62196-1: Plugs, sockets, vehicle connectors and vehicle entrances - Vehicle loading
driver - Part 1 - General requirements.
IEC 62196-2: Plugs, sockets, vehicle connectors and vehicle entrances - Electric vehicle
charging conductor - Part 2: Dimensional compatibility and interchangeability
requirement for a.c. pin and contact tube fittings.
IEC 61000-6-3: Electromagnetic compatibility (EMC) - Part 6-3; Generic standards -
Emission standard for residential, commercial and small industries.
IEC 61000-3-2: Electromagnetic compatibility (EMC) - Part 3-2; Limits for harmonious
power emissions (power input equipment 16A per phase).
IEC 61000-3-3: Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of
voltage changes, voltage fluctuations and flicker in public low voltage supply systems,
for equipment with normal current 16 A per phase and not subject to conditional
connection.
IEC 61000-6-1: Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of
voltage changes, voltage fluctuations and flicker in public low voltage supply systems,
for equipment with normal current 16 A per phase and not subject to conditional
connection.
IEC 61000-4-2: Electromagnetic compatibility (EMC) - Part 4-2; Test and measurement
techniques. Electrostatic discharge immunity test.
IEC 61000-4-3: Electromagnetic compatibility (EMC) - Part 4-3; Test and measurement
techniques. Immunity test for radiation, radio frequency and electromagnetic field.
IEC 61000-4-4: Electromagnetic compatibility (EMC) - Part 4-4; Test and measurement
techniques. Rapid electrical test of transient / explosion immunity.
To Next Page
Loading...