Model DMTC22KW
Domestic Charger AC 22kW
4.2 Wall Mounting
Use the supplied wall fixing materials (wall plugs and screws) to fix the Charger
to the wall. Make sure that the installation surface is flat.
Attention!
The fastenin The fastening materials equipped may vary depending on
the types of wall surfacesurfs surface .The use of appropriate fixing
devices guarantees the correct
equipment. functioning of the equipment.
Wall mounting plate
→ After correctly adjusting the vertical position of the charger, mark 4 mounting holes
in the desired location on the wall. The supplied wall mounting plate can be used as a
guide for this purpose.
→ Insert the dowels into the holes drilled on the edge of the wall mounting plate. Use
the appropriate screws to secure the installation plate to the wall.
To Next Page
Loading...