Volt-E DMTC22KW - Spinning

To Next Page

To Previous Page

Model DMTC22KW

Domestic Charger AC 22kW

→ After fixing the installation plate on the desired location, the charging device can

now be attached to the support plate.

DMTC22KW charger back part

⇒ Optional: The DMTC22KW charger can be applied to a pedestal and fixed to the

floor. If you want this option, check with the manufacturer Volt-E.

4.3. Spinning

Completely turn off the power during the entire wiring procedure.

Make sure that the charger is correctly connected to a permanent

metal grounding wiring system or to a grounding conductor.

- Check the color arrangement of the cables (European - IEC);