Model DMTC22KW
Domestic Charger AC 22kW
3.Before installation
Before any installation work is performed, consult all drawings provided by the
supplier for installation, including perspective drawings.
Please read this section carefully before handling the charger
wiring. All instructions described below must be strictly
followed..
3.1. Electrical protections
To ensure the complete protection of the installation and operation of the charger
against any electrical risk, it is mandatory to install a main circuit breaker (MCB) and a
residual current device (RCD) upstream of the charger.
These electrical protections and the rest of the installation must be in line with local
and national rules. The selectivity of the protections must be guaranteed throughout
the installation process.
Electrical Hazard
Take precautions to make the electrical connection inside the
charger.
This device must be completely disconnected from
any power source during commissioning.
Attention
Inappropriate operations can result in serious damage to
property and void the warranty!
To Next Page
Loading...