Model DMTC22KW
Domestic Charger AC 22kW
⇒ The following information will appear on the screen: number of kW charged, speed
in kW and elapsed charging time.
⇒ If you want to interrupt the loading before the scheduled time, press "Stop"; Swipe
the RFID card again to stop charging and for a refund of discounted minutes that have
not been used.
5.1.2. Management Software
OCPP connection with client server (optional).
This protocol allows communication between the charging station and the
central management system. In that case, control can be performed remotely.
→ If the customer does not have his own server, it is possible to purchase this
extra service with Volt-E.
To Next Page
Loading...