Volt-E DMTC22KW - How to Configure the Station

To Next Page

To Previous Page

Model DMTC22KW

Domestic Charger AC 22kW

6.3. How to configure the Charging Station (for basic software

and OCPP management software)

⇒ To configure the Charging Station, you need to enter the hidden menu. To enter the

hidden menu, return to the standard home menu and click 2x in the lower left corner

and enter the default password. The default password is “436174”. You can change

this password later.

⇒ In the hidden menu you can find the following table of configuration options:

⇒ Connector Setting: This menu includes the following configuration options:

→ Defined charger ID: “abcd1234”;

→ Connector name defined: “AC”;