29
Any use other than that described above will damage the product and may involve
other risks, such as short-circuit, fire, electric shock. Do not change or modify any
part of the product.
The safety instructions must be observed.
Designation of individual parts
See fold-out section
1 Graphic dot matrix display (LCD)
2 Keypad for operating the measuring device
3 Rotary switch for setting the measuring functions
4 COM measuring socket (reference point for all measuring inputs)
5 Measuring socket for mA and µA current measuring
6 Measuring socket for voltage and resistance measuring
7 DC voltage supply socket (only for optional power pack unit)
8 Optical IR interface
9 Measuring socket for 10A current measuring
10 Battery compartment cover screw
11 Casing screws for fuse change
12 Battery compartment cover
To Next Page
Loading...
Need help?
General
