WINDOWS, GLASS AND MIRRORS
* Option/accessory.
161
•
Using the sun blind* (p. 164)
•
Sunroof* (p. 168)
Reset sequence for pinch
protection
If any fault arises with the electrical functions of
the power windows, a reset sequence can be
tested.
The electrically-operated sun blinds* have a
reset sequence that can be tested in the event
of problems.
WARNING
If the starter battery is disconnected, the
automatic opening and closing function must
be reset to work properly. A reset must take
place for pinch protection to work.
If the problem persists, or if it concerns the pan-
oramic roof or sunroof, contact a workshop.
2
Reset the power window
1. Start with the window in closed position.
2. Then operate it in the manual position 3
times upwards to closed position.
> The system is initiated automatically.
Reset sun blind
1.
Start with the sun blind* retracted.
2. Press the control against retracting mode for
approx. 15 seconds.
> The system is initialised automatically.
Related information
•
Pinch protection for windows and sun blinds
(p. 160)
•
Operating power windows (p. 162)
•
Using the sun blind* (p. 164)
2
An authorised Volvo workshop is recommended.
To Next Page
Loading...
