STARTING AND DRIVING
* Option/accessory.
479
Related information
•
Using HomeLink (p. 479)
•
HomeLink
®
* (p. 476)
•
Type approval for HomeLink
®
* (p. 480)
Using HomeLink
When HomeLink
®
is fully programmed it can be
used in place of the separate original remote
controls.
Depress the programmed button. The garage
door, gate, alarm system or similar is activated
(may take a few seconds). If the button is
depressed for more than 20 seconds then the
reprogramming is started. The indicator lamp illu-
minates or flashes when the button has been
depressed. Naturally the original remote controls
can still be used in parallel with HomeLink
®
if
required.
NOTE
If the ignition is switched off, HomeLink
®
will
work for 30 minutes after the driver's door
has been opened.
WARNING
•
If HomeLink
®
is used to control a garage
door or gate, ensure that nobody is near
the door or gate while it is in motion.
•
Do not use HomeLink
®
for any garage
door that does not have safety stop and
safety reverse.
Related information
•
HomeLink
®
* (p. 476)
•
Programming HomeLink
®
* (p. 477)
•
Type approval for HomeLink
®
* (p. 480)