INFOTAINMENT
35
Infotainment - advanced audio
settings
Sound settings for the radio and other media
sources can be adjusted to your preferences.
To access the advanced sound settings, press
SOUND to open the menu. Turn TUNE, go to
Premium sound and press OK/MENU.
Sound stage
Sound reproduction can be optimized for differ-
ent sections of the passenger compartment. The
sound stage can be set for the
Driver seat, the
Rear seats or the Whole car.
1.
Turn TUNE to go to
Sound stage and press
OK/MENU.
2.
Select a profile by turning TUNE and confirm
by pressing OK/MENU.
Surround
When switched on, the system will automatically
select settings for the best sound quality, which
is normally DPL II and
will appear on the
screen. If the recording was made using Dolby
Digital technology, playback will be provided with
this setting and
will appear on the
screen. If Surround is switched off, audio will be
provided using 3 channel stereo.
1.
Turn TUNE to go to
Surround and press
OK/MENU.
2. Surround can be switched on or off by press-
ing OK/MENU
The Surround level can be adjusted separately
when the function is on.
1.
Turn TUNE to go to the level setting and
confirm by pressing OK/MENU.
2.
Select a Surround level by turning TUNE and
confirm by pressing OK/MENU.
Subwoofer
The subwoofer's sound level can be adjusted
separately.
1.
Turn TUNE to go to
Subwoofer and press
OK/MENU.
2.
Select a sound level by turning TUNE and
confirm by pressing OK/MENU.
Center speaker
The center speaker's sound level can be adjusted
separately. If Surround is on,
DPL II center level
will be selected; otherwise 3 channel center
level is selected.
1.
Turn TUNE to go to
Center and press OK/
MENU.
2.
Select a sound level by turning TUNE and
confirm by pressing OK/MENU.
Related information
•
Infotainment – operating the system (p. 28)
•
External audio source volume (p. 56)
Adjusting the equalizer
Adjust the equalizer and adapt the sound level
separately for each radio waveband.
1.
Press SOUND to access the sound settings.
Turn TUNE to select
Equalizer and press
OK/MENU.
2.
Select the waveband by turning TUNE and
confirm by pressing OK/MENU.
3.
Make the settings by turning TUNE and con-
firm by pressing OK/MENU or cancel by
pressing EXIT. Do the same for the other
wavebands.
4. When the settings have been made, press
EXIT to confirm and return to the normal
view.
Related information
•
Infotainment – operating the system (p. 28)
To Next Page
Loading...
