INFOTAINMENT
}}
59
Method 1: search for the external
device using the infotainment system's
menus
1. Make the external device discoverable/visible
using its Bluetooth
®
function. Refer to the
device's user's guide if necessary or go to
www.volvocars.com.
2. From the telephone's normal view, press
OK/MENU and select
Search new phone
(for media players, Search new device).
> The infotainment system will now search
for Bluetooth
®
devices that are in range,
which may take up to 1 minute.
3.
Select a Bluetooth
®
device from the list and
press OK/MENU.
4. Be sure that the code displayed in the device
is the same as the one shown on the info-
tainment screen. If so, accept the code in
both places.
5. From the cell phone, accept or reject any
choices regarding its phone book and mes-
sages.
> The external device is now paired to the
infotainment system.
If this method has not succeeded, press EXIT
and pair the device using method 2.
Method 2: search for the vehicle using
the external device’s Bluetooth
®
function
1. From the telephone's normal view, press
OK/MENU and select
Make car
discoverable. Confirm by pressing OK/
MENU.
2.
Search for Bluetooth
®
devices (i.e., the info-
tainment system) from the external device,
which may take up to 1 minute.
3. Select the vehicle's name on the external
device's screen.
4. Be sure that the code displayed in the device
is the same as the one shown on the info-
tainment screen. If so, accept the code in
both places.
5. From the cell phone, accept or reject any
choices regarding its phone book and mes-
sages.
> The external device is now paired to the
infotainment system.
When the external device has been paired and
selected, its Bluetooth
®
name will appear on the
infotainment system's screen and the device can
be controlled from the vehicle.
Related information
•
Infotainment – operating the system (p. 28)
•
Connecting and disconnecting a Bluetooth
®
device (p. 57)
Pairing a Bluetooth
®
device
Two Bluetooth
®
devices (a cell phone and a
media player) can be connected at the same
time and you can toggle between them. It is also
possible to make a phone call and stream audio
files at the same time, and a cell phone can be
used to connect the vehicle to the Internet .
Up to 15 Bluetooth
®
devices can be paired to the
infotainment system and the pairing procedure
only needs to be done once for each device.
After pairing has been completed, the device no
longer needs to be visible or discoverable; its
Bluetooth
®
feature only needs to be activated.
NOTE
If your cell phone's operating system is upda-
ted, this may break the connection between
the phone and the vehicle. If this happens,
delete the phone from the list of paired
phones (Deleting a Bluetooth
®
device
(p. 62)) and repeat the pairing procedure
described in this article.
The procedure for connecting an external device
varies, depending on whether the device has
been paired previously.
Both of the following connection methods
assume that the device has not yet been paired
to the system.
To Next Page
Loading...
