Volvo Sensus Connect - Automatically Connect a Bluetooth; Switching to Another Bluetooth Device

INFOTAINMENT
61
Automatically connect a Bluetooth
®
device
When a Bluetooth
®
device has been paired to
the infotainment system, it will automatically be
connected when the ignition is switched on.
When Bluetooth
®
is active and the most recently
connected device is within range, it will be con-
nected automatically. If this device is not within
range, the system will attempt to connect another
previously paired device.
To connect a different paired device, press EXIT,
select to connect a new device or switch to
another Bluetooth device.
Related information
•
Infotainment – operating the system (p. 28)
•
Connecting and disconnecting a Bluetooth
®
device (p. 57)
Switching to another Bluetooth
®
device
If more than one device is connected at the
same time, you can switch between these devi-
ces. Before this is possible, they must first be
paired with the infotainment system.
Switching media players
1.
Be sure that the external device's Bluetooth
®
function is activated. Refer to the devices's
user's guide if necessary.
2.
From the media Bluetooth
®
´s normal view,
press OK/MENU and select
Change
device.
> The infotainment system will search for
previously connected devices. The
Bluetooth
®
names of the devices found
will appear in the center console display.
3. Select the desired device.
> The selected device will be connected.
Switching cell phones
1.
Be sure that the external device's Bluetooth
®
function is activated. Refer to the devices's
user's guide if necessary.
2. From the telephone’s normal view, press
OK/MENU and select
Change phone.
> The infotainment system will search for
previously connected phones. The
Bluetooth
®
names of the phones found
will appear in the center console display.
3. Select the desired device.
> The selected device will be connected.
Related information
•
Infotainment – operating the system (p. 28)
•
Connecting and disconnecting a Bluetooth
®
device (p. 57)