IMPACT
®
4000
40 41
WEATHER INFORMATION
When calculating wind/drop solutions in BAL Mode, it
will be necessary to account for wind and weather for
the most accurate solution. The Impact
®
4000 comes
with on-board Environmental Sensors to capture the
following data:
• Direction (compass)
• Temperature (thermometer)
• Angle of Incline (inclinometer)
• Pressure (barometer)
• Humidity (hygrometer)
Access Wind, Weather and Wind and Target Direction
screens by pressing the “Wind Bearing Capture”
button and using the Measure button to toggle
through screens.
Wind Screen
Wind Bearing Capture
The Impact
®
4000 uses the patented Wind Bearing
Capture to manually input wind speed and direction.
The Impact
®
will keep track of wind direction
regardless of the direction the user is facing.
Note: Be sure that the Impact
®
4000 has been properly
calibrated (see pages 13-16) before attempting to use the
Wind Bearing Capture Mode.
Weather
Once you have connected your devices to your
network, select “Weather” on the Connected Devices
Menu and select which device you’d like to provide
weather information. The selected device will be
denoted with an arrow. Weather can be sourced from
the Impact
®
4000 on-board Environmental Sensors
or from the GeoBallistics
®
App. The GeoBallistics
®
App can source weather from local weather stations or
third-party wind meters.
Wind
Once you have connected your devices to your
network, select “Wind” on the Connected Devices
Menu and select which device you’d like to provide
wind information. The selected device will be denoted
with an arrow. Wind data can be manually inputted
via the Impact
®
4000 or the Geoballstics
®
App. The
GeoBallistics
®
App can source wind data from local
weather stations or third-party wind meters.
To Next Page
Loading...
