Getting started
12
Plug one end of the telephone line cord into the TEL LINE jack on the
back of the telephone base. Plug the other end of the telephone line cord
into a telephone wall jack. Place the handset in the telephone base.
Plug the small end of the power adapter into the POWER jack on the
back of the telephone base. Plug the large end into an electrical outlet not
controlled by a wall switch.
9.
10.
Telephone line cord
DSL lter (not included),
required if you have
DSL high-speed Internet
service.
Telephone wall jack
Electrical outlet
not controlled by a
wall switch
To Next Page
Loading...
