VTech CS6124 User Manual

6
Getting started
Handset layout
CID/VOL-
Press to review the call log when the telephone is
not in use (page 23).
During a call, press to decrease the listening
volume. A double beep sounds at the lowest setting
(page 13).
Press to scroll down while in a menu or reviewing
the directory, call log or redial list.
When entering numbers or names in the directory,
press to move the cursor to the left.
/FLASH
Press to make or answer a call (page 13).
During a call, press to answer an incoming call when
you receive a call waiting alert (page 14).
CHARGE light
On when the handset is charging in the telephone
base (page 4).
CANCEL
MUTE/DELETE
While on a call, press to mute the microphone page 13).
While using the dialing keys, press to delete digits.
While the handset is ringing, press to silence the ringer
temporarily (page 14).
When reviewing the directory, call log or redial list, press to delete the
desired entry
(page 21, 25 or 16).
TONE
Press to switch to tone dialing temporarily when
using the pulse service (page 14).
Dialing keys
Press to enter numbers or characters.
1
Press repeatedly to add or remove 1 in front of
the call log entry before dialing or saving it to
the directory.

VTech CS6124 Specifications

Frequency and Channels

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH battery
telephone base power	6V AC @ 300mA
charger power	6V AC @300mA

Memory

handset directory memory locations	30 memory locations
handset directory memory capacity	up to 30 digits and 15 characters
handset call log memory locations	30 memory locations