Ringer volume (telephone base)
Press /VOLUME or /VOLUME on the telephone base to adjust the ringer
volume when the telephone is not in use. When you set the ringer volume to
zero, the base ringer is off and the system announces, “
Base ringer is off.”
Ringer volume (handset)
You can adjust the ringer volume or turn the ringer off.
Press MENU/SELECT when the handset is not in use.
Press
CID or until the screen displays Ringers,
then pressress MENU/SELECT twice.
Press
CID/VOL
-
or /VOL
+
to select ringer volume
from Off, Low or High. A sample of each ringer volumeA sample of each ringer volume
plays as you scroll through the choices.
Press
MENU/SELECT to save your selection, you will
JGCTCEQPſTOCVKQPVQPG
Ringer tone
You can change the handset ringer tone.
Press MENU/SELECT when the handset is not in use.
Press
CID or until the screen displays Ringers,
then press MENU/SELECT.
Press
CID or until the screen displays
Ringer tone, then press MENU/SELECT.
Press
CID or to choose Tone: 1, 2, 3, or 4. The
EWTTGPVUGVVKPIƀCUJGU#UCORNGQHGCEJTKPIGTVQPG
plays as you scroll through the choices.
Press
MENU/SELECT to save your selection, you will
JGCTCEQPſTOCVKQPVQPG
•
1.
2.
3.
4.
1.
2.
3.
4.
5.
Telephone settings
Ringers
Volume:High
If the ringer volume is set to Off, Ringer off is displayed on the idle screen.
The setting also determines the ringer volume of the handset paging tone.
However, when the ringer volume is set to Off, the handset still rings when
you press /FIND HANDSET.
•
•
If you turn off the ringer volume, you will not hear ringer
tone samples.
•
Ringers
Ringer tone
Tone: 1
To Next Page
Loading...
Need help?
Frequency and Channels
Memory
