VTech CS6124 User Manual

4
Getting started
Battery installation
Install the battery as shown below.
If the battery compartment cover is on the handset, press on the indentation
and slide the cover down to remove.
Plug the battery connector securely into the socket inside the handset
battery compartment, matching the color-coded label.
Place the battery with the label THIS SIDE UP facing up and the wires
inside the battery compartment.
#NKIPVJGEQXGTƀCVCICKPUVVJGDCVVGT[EQORCTVOGPVVJGPUNKFGKVVQYCTFU
the center of the handset until it clicks into place.
Charge the handset by placing it in the telephone base or charger. The
CHARGE light remains on whenever the handset is charging in the
telephone base or charger.
1.
2.
3.
4.
5.
If the handset will not be used for a long period of time, disconnect and
remove the battery to prevent any possible leakage.
To purchase a replacement battery, visit our website at www.vtechphones.com
or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
•
•
1
4
2 3
5
CHARGE
light

VTech CS6124 Specifications

Frequency and Channels

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH battery
telephone base power	6V AC @ 300mA
charger power	6V AC @300mA

Memory

handset directory memory locations	30 memory locations
handset directory memory capacity	up to 30 digits and 15 characters
handset call log memory locations	30 memory locations