VTech CS6124 User Manual

31
Answering system operation
New message indication
When there are new answering system messages, and XX new message(s)
UJQYQPVJGJCPFUGVCPFVJGOGUUCIGYKPFQYQPVJGVGNGRJQPGDCUGƀCUJGU
If the new message alert tone is turned on, the telephone base beeps every
10 seconds when there are messages that have not been reviewed.
Call intercept
If you want to talk to the person whose message is being recorded, press
/FLASH or on the handset.
Message playback
If you have new messages, the telephone plays only the new messages (oldest
ſTUV+HVJGTGCTGPQPGYOGUUCIGUVJGVGNGRJQPGRNC[UDCEMCNNOGUUCIGU
QNFGUVſTUV
When playback begins, you hear the total number of messages followed by the
day and time of the message. After the last message, the telephone announces,
“End of messages.”
To play messages with the telephone base:
Press /PLAY/STOP when the phone is not in use.
Options during playback:
Press
/VOLUME or /VOLUME to adjust the speaker volume.
Press
/SKIP to skip to the next message.
Press
/REPEAT to repeat the message currently playing.
Press /REPEAT twice to listen to the previous message.
Press X/DELETE to delete the current message. The system advances to
the next message.
Press /PLAY/STOP to stop.
To play messages with a handset:
Press MENU/SELECT when the phone is not in use.
Press MENU/SELECT to select Play messages.
Options during playback:
Press
CID/VOL
-
or
/
VOL
+
to adjust the speaker volume.
Press 6 to skip to the next message.
Press 4 to repeat the message currently playing. Press 4 twice to listen to
the previous message.
Press 3 to delete the current message. The system advances to the
next message.
Press OFF/
CLEAR to stop.
1.
•
•
•
•
•
1.
2.
•
•
•
•
•
During message playback, if there is an incoming call or another handset makes
a call, message playback will be stopped.
•

VTech CS6124 Specifications

Frequency and Channels

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH battery
telephone base power	6V AC @ 300mA
charger power	6V AC @300mA

Memory

handset directory memory locations	30 memory locations
handset directory memory capacity	up to 30 digits and 15 characters
handset call log memory locations	30 memory locations