Key tone
You can turn the key tone on or off.
Press MENU/
SELECT when the handset is not in use.
Press CID or until the screen displays Settings,
then press
MENU/SELECT.
Press CID or until the screen displays Key tone,
then press
MENU/SELECT.
Press
CID or to choose On or Off, then press
MENU/SELECTVQEQPſTO[QWTUGNGEVKQP;QWYKNNJGCTC
EQPſTOCVKQPVQPG
Set date and time
The answering system announces the date and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. However, the year must be correct
so that the day of the week can be calculated from the caller ID information.
Press MENU/
SELECT when the handset is not in use.
Press
CID or until the screen displays Settings,
then press MENU/SELECT.
Press
CID or until the screen displays
Set date/time, then press MENU/SELECT.
9JGPVJGOQPVJKUƀCUJKPIRTGUU
CID or until
the screen displays the correct month and then press
MENU/SELECT; or, press the dialing keys (0-9) to enter
the current month (for example, December would be
represented as 12).
Repeat step 4 to set the correct date and year and then
press
MENU/SELECT to advance to time setting.
9JGPVJGJQWTKUƀCUJKPIRTGUU
CID or until
the screen displays the correct hour and then press
MENU/SELECT; or, press the dialing keys (0-9) to enter
the current hour (for example, twelve o’clock would be
represented as 12).
Repeat step 6 to set the correct minute. When AM or
PM KUƀCUJKPIRTGUU
CID or to select AM or PM.
Press
MENU/SELECT to save your settings, you will hear
CEQPſTOCVKQPVQPG
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
7.
If the date and time are not set when a message is recorded, the system
announces, “Time and date not set,” before each message plays.
When there is a power failure or after battery replacement, the time needs to
be reset.
•
•
Settings
Key tone
On
Settings
Set date/time
Date: 12/25/10
Time: 12:35 PM
To Next Page
Loading...
