VTech CS6124 User Manual

27
Answering system settings
Number of rings
You can choose from two, four, or six rings; or toll saver. With toll saver
selected, the answering system answers after two rings when you have
new messages, and after four rings when you have no new messages. This
enables you to check for new messages and avoid paying unnecessary long
distance charges if you are calling from out of your local area.
Press MENU/
SELECT when the handset is not in use.
Press
CID or to select Answering Sys, then press MENU/SELECT.
Press
CID or to select Ans sys setup, then press MENU/SELECT.
Press
CID or to select # of rings, then press MENU/SELECT.
Press
CID or to choose from 6, 4, 2 or Toll saver, then press
MENU/SELECT VQEQPſTO[QWTUGNGEVKQP;QWYKNNJGCTCEQPſTOCVKQPVQPG
Remote access code
A two-digit security code is required to access the answering system remotely
from any touch-tone telephone. The preset code is 19. You can set the code
from 00 to 99.
Press MENU/
SELECT when the handset is not in use.
Press
CID or to select Answering Sys, then press MENU/SELECT.
Press
CID or to select Ans sys setup, then press MENU/SELECT.
Press
CID or to select Remote code, then press MENU/SELECT.
Press the dialing keys (0-9) to enter the code or
CID or to select from
00 to 99, then press
MENU/SELECT VQEQPſTO[QWTUGNGEVKQP;QWYKNNJGCT
CEQPſTOCVKQPVQPG
Message alert tone
This telephone can beep every 10 seconds to alert you of new messages. The
tone stops when all new messages have been reviewed.
Press MENU/
SELECT when the handset is not in use.
Press
CID or to select Answering Sys, then press MENU/SELECT.
Press
CID or to select Ans sys setup, then press MENU/SELECT.
Press
CID or to select Msg alert tone, then press MENU/SELECT.
Press
CID or to choose On or Off, then press MENU/SELECT to
EQPſTO[QWTUGNGEVKQP;QWYKNNJGCTCEQPſTOCVKQPVQPG
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
While the answering system is answering a call, you can press /VOLUME once
on the telephone base, or press /PLAY/STOP to temporarily turn on the call
screening. Press /PLAY/STOP to temporarily turn off the call screening.
The answering system must be turned on for the message alert tone to function.
Press any key on the telephone base (except
/FIND HANDSET) to temporarily
silence the message alert tone.
•
•

VTech CS6124 Specifications

Frequency and Channels

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH battery
telephone base power	6V AC @ 300mA
charger power	6V AC @300mA

Memory

handset directory memory locations	30 memory locations
handset directory memory capacity	up to 30 digits and 15 characters
handset call log memory locations	30 memory locations