VTech CS6124 User Manual

33
Answering system operation
When the memory is full, the answering system answers incoming calls after
10 rings and announces, “Memory is full. Enter the remote access code.”
•
Window display Description
0
No messages.
1-9 9
Total number of old messages recorded.
Current message number during old message playback.
0-99 ƀCUJKPI
9JGPVKOGCPFFCVGCTGPQVUGVKVƀCUJGUVQVCNPWODGT
of new messages recorded, or total number of old
messages recorded.
The telephone base may have lost and regained power.
The clock needs to be set.
1-9 9 & F (alternating)
Memory is full with total number of messages recorded.
1-8
Telephone base speaker volume level while adjusting.
--
The system is answering a call, recording a memo or
announcement.
Telephone is answering a call, accessing directory or call
log, or being accessed remotely.
The answering system is being programmed.
0-6
Telephone base ringer level while adjusting.
Message window displays

VTech CS6124 Specifications

Frequency and Channels

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH battery
telephone base power	6V AC @ 300mA
charger power	6V AC @300mA

Memory

handset directory memory locations	30 memory locations
handset directory memory capacity	up to 30 digits and 15 characters
handset call log memory locations	30 memory locations