VTech CS6124 User Manual

12
Telephone settings
Home area code
If you dial local calls using only seven digits (area code not required), you can
program your home area code so that when you receive a call within your local
area, the telephone number is automatically stored in the call log without the
area code.
To change the setting:
Press MENU/
SELECT when the handset is not in use.
Press
CID or until the screen displays Settings,
then press
MENU/SELECT.
Press
CID or until the screen displays
Home area code, then press MENU/SELECT.The
screen displays --- if no area code is stored or the screen
displays the stored area code.
Use the dialing keys (0-9) to enter the desired home area
code or press
MUTE/DELETE to delete a digit.
Press
MENU/SELECTVQEQPſTO[QWYKNNJGCTCEQPſTOCVKQPVQPG
Dial mode
If you have touch-tone service, the telephone is ready to use as soon as the
battery is charged. If you have pulse (rotary) service, you need to change the
dial mode setting to pulse.
To change the setting:
Press MENU/SELECT when the handset is not in use.
Press
CID or until the screen displays Settings, then press
MENU/SELECT.
Press
CID or until the screen displays Dial mode, then press
MENU/SELECT.
Press
CID or to choose Tone or Pulse, then press MENU/SELECT to
EQPſTO[QWTUGNGEVKQP;QWYKNNJGCTCEQPſTOCVKQPVQPG
Website
Use this feature to view the VTech website address.
Press MENU/
SELECT when the handset is not in use.
Press
CID or until the screen displays Website, then press
MENU/SELECT. The screen will display the VTech website address.
1.
2.
3.
4.
5.
1.
2.
3.
4.
1.
2.
Home area code
Home area code
---
If, in the future, your telephone service provider requires you to dial the area
code when making a local call, or, if you move to a location that requires it,
delete the home area code you have already programmed following the steps
above. After you have deleted the home area code, --- appears.

VTech CS6124 Specifications

Frequency and Channels

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH battery
telephone base power	6V AC @ 300mA
charger power	6V AC @300mA

Memory

handset directory memory locations	30 memory locations
handset directory memory capacity	up to 30 digits and 15 characters
handset call log memory locations	30 memory locations