VTech CS6124 User Manual

13
Telephone operation
Make a call
Press /FLASH and then use the dialing keys (0-9)
to dial the telephone number.
Predial a call
Enter the telephone number using the dialing
keys (0-9), then press
/FLASH to dial.
Answer a call
Press /FLASH or any of the dialing keys (0-9, TONE or #).
End a call
Press OFF/CANCEL or put the handset to the telephone base.
Volume
During a call, press CID/VOL
-
or /VOL
+
to adjust
the listening volume.
Mute
The mute function allows you to hear the other party
but the other party cannot hear you.
During a call, press MUTE/
DELETE on the handset.
The handset screen displays Muted until the mute
function is turned off.
Press MUTE/
DELETE again to resume the
conversation. The handset screen temporarily
displays Microphone on.
•
•
•
•
•
1.
2.
Muted
10:15
PM 12/25
CANCEL
The screen shows the elapsed time as you talk (in hours, minutes
and seconds).
When predialing (preview numbers before dialing), press
MUTE/DELETE or
OFF/CANCEL to backspace and delete; press and hold REDIAL/PAUSE to
insert a dialing pause (a P appears).
If the handset is moved out of range while on a call, it will beep three times.
•
•
•

VTech CS6124 Specifications

Frequency and Channels

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH battery
telephone base power	6V AC @ 300mA
charger power	6V AC @300mA

Memory

handset directory memory locations	30 memory locations
handset directory memory capacity	up to 30 digits and 15 characters
handset call log memory locations	30 memory locations