14
USE YOUR PHONE
4.8.1 Redial a Number from the Redial List
In idle mode, press REDIAL to access the redial list.
Remark: If redial entry with name, press to view the number.
Press
p
q
to browse the redial list.
Press / to dial to the selected redial number.
NOTE
If there are no numbers in the redial list, the display shows “EMPTY”.
4.8.2 Store a Redial Number into the Phonebook
Follow Steps 1 and 2 in section 4.8.1.
Press and
p
q
to select ADD TO PB.
Press to enter the name.
Press to store the redial number into the phonebook.
Press to select phonebook melody.
Press
p
q
to browse the melody list. The respective melody will be played when
browsing the melody list.
Press to conrm.
4.8.3 Delete a Redial Number
Follow Steps 1 and 2 in section 4.8.1.
Press and
p
q
to select DELETE.
Press to conrm.
4.8.4 Delete the Entire Redial List
Follow Steps 1 and 2 in section 4.8.1.
Press and
p
q
to select DELETE ALL.
Press to conrm.
Press to conrm again.
4.9 Find the Handset
You can locate the handset by pressing on the base station. All the handsets
registered to the base will produce the paging tone and “PAGING” is displayed on the
LCD. You can stop the paging by pressing
/ / / on any handset or on
the base again.
NOTE
If there is an incoming call during paging, the phone will ring with the incoming call
instead of paging.
1.
2.
3.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
1.
2.
3.
4.
To Next Page
Loading...
Need help?
General
