22
PHONE SETTINGS
Press to enter the date information. The date entered will be in the format you
set in Section 7.1.2.
Press to conrm.
NOTE
If date has been set before, the current date will display, otherwise, “DD-MM-YY” will
display.
7.2 Alarm Settings
You can use this phone to set an alarm clock. When an alarm is set, the displays on
the LCD. When the alarm time is reached, the and “ALARM ON” ashes on the LCD
ringing with the alarm melody for a duration of 45 seconds. You can press any key to
disable the alarm. If snooze function is activated, the alarm will sound again at the end
of the snooze period of seven minutes.
NOTES
Key press is still applicable if handset keypad is locked and when the alarm time is
reached.
The alarm volume level is the same as the setting of the handset ringer volume.
If the handset ringer is set to VOLUME OFF, the alarm still sounds at VOLUME 1
level.
During an external call or internal call, if an alarm is set and when the alarm time is
reached, the and “ALARM ON” will still ash. An alarm tone will be emitted from
the earpiece to notify user the alarm time is reached. Once user press any key or
press and hold to disable the alarm, it will revert to the call duration screen.
During paging or ringing, the alarm will not sound when the alarm time is reached.
However if snooze function is enabled, the alarm will sound again at the end of
the snooze period provided that it’s not ringing or in paging mode at the end of the
snooze period.
7.2.1 Turn On/Off the Alarm
Press and
p
q
to select HS SETTINGS.
Press and
p
q
to select ALARM.
Press and
p
q
to select ON/OFF.
Press to conrm.
NOTE
If ON is selected, you will be asked to set the alarm time.
7.2.2 Set the Alarm Time (If the Alarm is Set to be ON)
Follow Steps 1 to 4 in Section 7.2.1.
Enter the alarm time.
4.
5.
a.
b.
c.
d.
1.
2.
3.
4.
1.
2.
To Next Page
Loading...
Need help?
General
