4
SET UP THE TELEPHONE
2.3 Connect the Base Station
Insert the DC plug of the power adapter and the telephone line cord into the base
station, as shown above.
Insert the other end of the power adapter into the wall outlet not controlled by a wall
switch and the telephone line cord into a telephone wall jack. If you have DSL high
speed internet service, a DSL lter (not included) is required.
NOTES
Always use the cables supplied with the product.
Use only the power adapter supplied with the base station.
2.4 Connect the Charger
Plug the power cable into the charger base.
Plug the other end into a power wall socket not controlled by a wall switch.
1.
2.
1.
2.
1.
2.
To Next Page
Loading...
Need help?
General
