VWR XT96 - Page 40

40 vwr.com I Instruction manual VWR
®
PCR Cycler XT
96
The Thermal Cycler will recognize the USB stick and set up the network configuration
automatically. After finalization, the instrument will switch off.
Remove the “Network Configuration USB-Stick” from the USB port of the XTender
96
and
power on the XTender
96
thermal cycler
Note:
For each thermal cycler, a new “XT96 Config File” must be created.
Licence Info
Software licence of the XT
96
GUI will be
shown
Network Settings
Using this button, network settings can
be changed
To change settings, click into the box
and enter
the required settings for
network integration.
Please ask your network administrator
for the required settings.
.
Service
Use of the service function is restricted
to authorised, technical service. Access
to this
function is therefore password
protected.