6
TEBS E
GIO functions
80
Automatic activation via parameter Traction help automatic with curve
detection.
Traction help ‘off-road’
As soon as the preset speed threshold has been reached, the function
reverts to standard traction help. This is also switched off when the
preset threshold value (speed and pressure) is reached.
Traction help can be activated by engaging the reverse gear. The ca-
ble to the reversing light must be monitored by TEBS E or ELEX for
this purpose.
Connection, switch
The following cabling options can be considered for installing the switch. The diode
is only required with the parameter Ground and +24V and can be omitted with the
parameters +24v only or Ground only.
Trailer / signal from towing vehicle +24 V
Trailer / signal from towing vehicle - (ground)
Button in trailer
Legend
A
Diode (up to TEBS E3)
Parameter setting
Traction help and its control are defined in tab 5, Lifting axle control.
To Next Page
Loading...
