Safety
6.8 General safety instructions for power tools
24
Operator’s Manual | APS | 5100060593 | 02/2022 | [en]
– Remove the adjusting tools or spanners before switching the
power tool on. A tool or wrench that is in a rotating part of the
power tool can cause injury.
– Avoid an abnormal posture. Ensure you have good footing
and keep your balance at all times. In this way, you can better
control the power tool in unexpected situations.
– Wear appropriate clothing. Do not wear loose clothing or
jewelry. Keep hair and clothing away from moving parts.
Loose clothing, jewelry or long hair can be caught in moving
parts.
– If dust extraction and collectionequipment can be fitted, con-
nect it and use it correctly. Use of a dust extraction mechanism
can reduce hazards from dust.
– Do not lull yourself into a false sense of security and do not
ignore the safety rules for power tools,even if you are famil-
iar with the power tool after using it many times. Careless ac-
tions can lead to serious injuries within fractions of a second.
4) Use and handling of the power tool
– Do not overload the power tool. Use the power tool intended
for your work. You will work better and more safely in the spe-
cified power range with the right power tool.
– Do not use a power tool whose switch is defective. A power
tool that can no longer be switched on or off is dangerous and
must be repaired.
– Unplug the power tool and/or remove a removable re-
chargeable battery before making any device adjustments,
changing insert tool parts or putting the power tool away.
These safety precautions prevent the accidental starting of the
power tool.
– Store unused power tools out of the reach of children. Do not
allow persons to use the power tool who are not familiar with
it or have not read these instructions. Power tools are danger-
ous if they are used by inexperienced persons.
– Care for power tools and insert tools with care. Check
whether moving parts function flawlessly and do not jam,
whether parts are broken or whether they are so damaged
that they impair the f unction of the power tool. Have dam-
aged parts repaired before application of the equipment.
Many accidents are caused by poorly maintained power tools.
– Keep cutting tools sharp and clean. Carefully maintained cut-
ting tools with sharp cutting edges jam less frequently and are
easier to guide.
– Use power tools, insertion tool, insertion tools, etc. in ac-
cordance with these instructions. In doing so, note the work-
ing conditions and the work to be carried out. The use of
power tools for applications other than those intended can lead to
dangerous situations.
– Keep handles and grip surfaces dry, clean and free of oil and
grease. Slippery handlesand grip surfaces do not allow safe op-
eration and control of the power tool in unforeseen situations.
5) Use and handling of the battery-powered tool
To Next Page
Loading...
Need help?
General
