Technical Data
General instructions 15.1
59
[en] | 02/2022 | 5100060593 | APS | Operator’s Manual
15 Technical Data
15.1 General instructions
Information
For system technical reasons, empty columns can be displayed in the
technical data, and numbers and letters that written in superscript or sub-
script may be displayed incorrectly, e.g:
► Sound power level LWA instead of L
WA
► Sound pressure level LpA instead of L
pA
► Vibration total value ahv instead of a
hv
► Carbon dioxide CO2 instead of CO
2
► Unit m/s2 instead of m/s
2
15.2 Noise and vibration data
The noise and vibration data listed have been determined in accordance
with the following guidelines for the typical machine operating conditions /
special test conditions and using harmonized standards:
• Machinery Directive 2006/42/EC
• Noise Emission Directive 2000/14/EC
During operational use, values may differ depending on the prevailing op-
erating conditions.
Sound pressure level at operator station
• L
pA
was determined according to EN ISO 11201 and EN 500-4.
Guaranteed sound power level
• L
WA
was determined according to EN ISO 3744 and EN 500-4.
Weighted vibration total value hand-arm vibration
• a
hv
was determined according to EN ISO 20643 and EN 500-4.
15.3 APS
Type APS1030we APS1030e
Material number machine 5100058917 5100059660
Rechargeable battery material number 5100025709
5100048620
5100060982
5100025709
5100048620
5100060982
Centrifugal force [kN] 10 10
Vibrations [Hz] 98 98
Vibrations [1/min] 5880 5880
Area output* [m2/h] 500 500
Flow [m/min] 26 26
15
To Next Page
Loading...
Need help?
General
