Maintenance
11.2 Maintenance plan
50
Operator’s Manual | APS | 5100060593 | 02/2022 | [en]
CAUTION
Danger of burns due to hot surfaces!
Exciter can become very hot after a short time, which can cause severe
burns if it comes into contact with the skin.
► Always allow the machine to cool down after use.
► If the cooling phase cannot be maintained (e.g. due to an emer-
gency) - use heat-resistant protective gloves.
NOTICE
Damage by penetrating water!
Penetrating water can damage electrical operating elements or machine
components.
Penetrating moisture can lead to total failure.
► Do not clean the machine with high pressure or steam cleaners!
► Use a cloth to remove water that has entered (e.g. due to rain) the
housing and then let the machine dry.
► Only use dry and clean cloths.
Environment
Avoid damage to the environment!
► Clean the machine in a suitable place where the dirty waste water
can be collected in an environmentally friendly manner.
► Collect contaminated water and dispose of it in an environmentally
friendly manner.
11.2 Maintenance plan
Maintenance work daily 125h
Clean machine, rechargeable battery and charger.
• Visual check for completeness.
• Visual check for damage.
●
Check operating elements for ease of movement. ●
Check screw connections. ●
Check rubber buffer. ●
To Next Page
Loading...
Need help?
General
