Wacker Neuson BS 50-4 Repair Manual

Name: Wacker Neuson BS 50-4
Brand: Wacker Neuson
Rating: 4 (1 reviews)

156 pages

To Next Page

To Previous Page

Oil Injection (if equipped) Rammer Repair

126 wc_tx001549gb.fm

Installation

Perform the procedure below to install the oil pump.

7.5.1 Slide the cartridge assembly (g) into the crankcase.

7.5.2 Install the pump to the machine using three screws

(b). Torque the

screws to 17 Nm (12 ft.lbs.).

7.5.3 Reconnect the output hose (a).

7.5.4 Reinstall the engine.

7.5.5 Reinstall the carburetor.

Result

The replacement procedure is now complete.

Other manuals for Wacker Neuson BS 50-4

Need help?

Do you have a question about the Wacker Neuson BS 50-4 and is the answer not in the manual?

General

Engine Manufacturer	Honda
Stroke Height	65 mm
Fuel Type	Gasoline
Centrifugal Force	15 kN
Sound Pressure Level	92 dB(A)
Sound Power Level	105 dB(A)
Height	965 mm
Ramming Shoe Size	280 mm
Tank Capacity	3.1 l
Fuel Tank Capacity	3.1 l
Engine Type	4-cycle, single-cylinder, air-cooled
Percussion Rate	680 blows/min