Wacker Neuson BS 50-4 Repair Manual

Repair Engine and Upper Machine Components
wc_tx001546gb.fm 59
4.17 Engine Cooling Fins
Recommended Tools
Screwdriver
Compressed air
The Wacker WM 80 engine is air cooled, so dirt accumulation between
the cylinder ribs may cause the engine to overheat. Use a screwdriver
to remove any dirt that is impacted between the cylinder ribs. Clean the
entire area using compressed air.

Wacker Neuson BS 50-4 Specifications

General

Engine Manufacturer	Honda
Stroke Height	65 mm
Fuel Type	Gasoline
Centrifugal Force	15 kN
Sound Pressure Level	92 dB(A)
Sound Power Level	105 dB(A)
Height	965 mm
Ramming Shoe Size	280 mm
Tank Capacity	3.1 l
Fuel Tank Capacity	3.1 l
Engine Type	4-cycle, single-cylinder, air-cooled
Percussion Rate	680 blows/min