DPU 130Le 6 Components and operator's controls
Operator's manual
42
Charging control lamp
The Charging control lamp indicates if the machine's battery is being charged.
The Charging control lamp is lit in red if the machine is activated.
The Charging control lamp extinguishes when the engine is running.
The Charging control lamp is lit in red when the machine's battery is no longer
being charged.
Preheating control lamp
The Preheating control lamp indicates whether the glowplugs are being
preheated during the startup of the motor.
The Preheating control lamp is lit in yellow as long as the glowplugs of the
engine are being preheated during startup.
The Preheating control lamp extinguishes when preheating has been
completed.
Air cleaner control lamp
The air cleaner control lamp indicates the maintenance state of the air cleaner.
The Air cleaner control lamp is lit in yellow when the air cleaner is dirty.
Oil pressure control lamp
The Oil pressure control lamp indicates whether the oil pressure is sufficient.
The Oil pressure control lamp is lit in red if the machine is activated.
The Oil pressure control lamp extinguishes when the engine is running.
The Oil pressure control lamp is lit in red when the oil pressure is too low.
Coolant temperature control lamp
The Coolant temperature control lamp indicates whether the coolant
temperature is within the permissible range.
The Coolant temperature control lamp is lit in red when the coolant
temperature is too high.
Display screen
The display screen shows the following information:
Number of hours of operation.
The machine's current transmission channel.
Error conditions (see chapter Malfunctions).