10 Troubleshooting DPU 130Le
97
Operator's manual
24 Error
Gas adjuster
Fuel tank is empty. Top up with fuel.
Throttle solenoid or electrical
connection is defective.
Throttle solenoid cable
control is defective.
80 A fuse has burnt through.
Have the machine repaired. *
25 Error
Temp. sensor
Temperature sensor or
electrical connection is
defective.
Have the machine repaired. *
26 Shutdown
Oil pressure
Engine oil level is too low. 1. Deactivate the machine.
2. Top up with engine oil.
Oil pressure switch or electrical
connection is defective.
Have the machine repaired. *
27 Error
Overload
Overload sensor or electrical
connection is defective.
Have the machine repaired. *
— Error Decoder Wiring box electrical connection
is defective.
1. Deactivate machine with
emergency stop switch.
2. Have the machine repaired. *
* Have these tasks carried out by the service department of your Wacker Neuson contact person.
Error
code
Display screen Cause Remedy
To Next Page
Loading...
Need help?
General
