5-60 BA ET18, 20, 24 en* 1.5 * et18_20_24b510.fm
5 Operation
Tilting the upper carriage (Vertical Digging System) (option)
Crushing hazard due to tipping over of machine!
Serious crushing hazard causing death or serious injury.
► On a slope, position the machine so that the upper carriage is tilted
toward the slope.
► Tilt the machine only on firm ground.
► Perform smooth and slow movements with the machine.
► Tilt the machine only if it is at a standstill and if the attachment is
empty.
► Never turn, lower, or set down the attachments abruptly.
► Do not extend or retract the boom abruptly.
► Do not exceed a maximum lateral angle of inclination of 10°.
► Do not exceed a maximum sloping angle of 15°.
Crushing hazard. Due to tilting the machine in the immediate vicinity
of walls or parts of buildings.
Danger of serious crushing that can cause death or serious injury.
► Ensure that no parts of the body protrude outside the machine.
► All persons must stay clear of the danger zone when tilting the
machine.
► Neither access nor leave the machine when it is tilted.
To Next Page
Loading...
