EasyManua.ls Logo

Wacker Neuson ET12 02

Wacker Neuson ET12 02
286 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BA ET18, 20, 24 en* 1.5 * et18_20_24w700.fm 7-33
Maintenance 7
7.9 Cooling system
Important information regarding the cooling system
The oil/water radiator is located behind the cover on the right, on the right
side of the engine. It cools the diesel engine, and the hydraulic oil of the
drive and operating hydraulics.
NOTICE
In order to avoid damage to the engine and radiator.
Observe the fluids and lubricants table, and the coolant compound
table.
Check the coolant level once a day.
Checking the coolant level
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Open the engine cover.
3. Check the coolant level on sight glass A.
4. If the coolant level is below the FULL mark:
Add coolant.
5. Close and lock the engine cover.
Information
Check the coolant level once a day.
We recommend checking it before starting the engine.
Observe the coolant compound table.
Fig. 260Check the coolant level
A
FULL

Table of Contents

Related product manuals